Sketchup Dynamic components model

You don't have a 3D geometry and you want to quickly sketch a square/rectangular building? 

This article will show you how to use a Sketchup model with dynamic components which has been built by the Sefaira team. Using this model you won't have to draw anything in Sketchup to build the model (just to input some numbers). 

You will be interested in this article if:

  1. You have Sketchup pro (otherwise the dynamic components won't work)
  2. The building you want to analyse is square or rectangular 
  3. You don't already have a 3D geometry (or your 3D geometry is too complex to work with Sefaira)
  4. You are not very proficient with Sketchup or want to quickly play with multiple shading or WWR options. 

Example 1

 

Example 2

 

 

How to use the Sketchup model?

  1. Download the attached Sketchup model (Sketchup model with Dynamic Components.skp)
  2. Open the file and right click on the building and Select "Dynamic Components->Components Options"
  3. This window will pop-up in your Sketchup interface

You can change here:

  • The building orientation (0 being the current orientation)
  • The building Width and Depth
  • The number of Floors
  • The floor to floor height
  • The Glazing ratio on each Facade
  • The Shading length on each Facade

    4. Click on Apply

    5. All the entities for Sefaira (including shading) are already properly tagged. 

    6. Start exploring the plugin outputs! 

 

Was this article helpful?
0 out of 0 found this helpful

Comments